Posts tagged siemens s5 95u

plc controller 6GK7242-5DX30-0XE0 COMMUNICATION MODULE CM 1242-5

s7 simatic COMMUNICATION MODULE CM 1242-5; FOR CONNECTION OF SIMATIC S7-1200 TO PROFIBUS AS DP SLAVE MODULE

Transmission rate
Transmission rate / at interface 1 / in accordance with PROFIBUS 9.6 kbit/s…12 Mbit/s
Interfaces
Number of electrical connections
  • at interface 1 / in accordance with PROFIBUS
1
  • for power supply
0
Design of electrical connection
  • at interface 1 / in accordance with PROFIBUS
9-pin Sub-D socket (RS485)
Supply voltage, current consumption, power loss
Type of voltage / of supply voltage DC
Supply voltage
  • 1 / from backplane bus
5 V
Consumed current
  • from backplane bus / at 5 V / for DC / Typical
0.15 A
Resistive loss 0.75 W
Permitted ambient conditions
Ambient temperature
  • for vertical installation / during operating phase
0…45 °C
  • for horizontal installation / during operating phase
0…55 °C
  • during storage
-40…+70 °C
  • during transport
-40…+70 °C
Relative humidity / at 25 °C / without condensation / during operating / maximum 95 %
Protection class IP IP20
Design, dimensions and weight
Width 30 mm
Height 100 mm
Depth 75 mm
Net weight 0.115 kg
Product properties, functions, components / general
Number of modules
  • per CPU / maximum
3
Performance data
Performance data / PROFIBUS DP
Service / as DP slave
  • DPV0
Yes
  • DPV1
Yes
Amount of data
  • of the address area of the inputs / as DP slave / overall
240 byte
  • of the address area of the outputs / as DP slave / overall
240 byte

programmazione plc siemens 6ES7 232-4HB30-0XB0 SM 1232 2AO

s7 simatic 6ES7232-4HB30-0XB0

ANALOG OUTPUT SM 1232, 2AO

automatas programables siemens SIMATIC S7-1200, ANALOG OUTPUT, SM 1232, 2 AO, +/-10V, 14 BIT RESOLUTION, OR 0-20 MA, 13 BIT RESOLUTION

Supply voltage
24 V DC Yes
Input current
Current consumption, typ. 45 mA
from backplane bus 5 V DC, typ. 80 mA
Power losses
Power loss, typ. 1.5 W
Analog inputs
Number of analog inputs 0
Thermocouple (TC)
Temperature compensation
Parameterizable No
Analog outputs
Number of analog outputs 2; Current or voltage
Output ranges, voltage
-10 to +10 V Yes
Output ranges, current
0 to 20 mA Yes
Load impedance (in rated range of output)
with voltage outputs, min. 1000 Ω
with current outputs, max. 600 Ω
Analog value creation
Measurement principle Differential
Integrations and conversion time/ resolution per channel
Resolution (incl. overrange) Voltage: 14 bits; Current : 13 bits
Integration time, parameterizable Yes
Interference voltage suppression for interference frequency f1 in Hz 40 dB, DC to 60 V for interference frequency 50 / 60 Hz
Errors/accuracies
Temperature error (relative to output area) 25 °C ±0.3% to 55 °C ±0.6% total measurement range
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area +/- 0.3 %
Current, relative to output area +/- 0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
common mode voltage, max. 12 V
Interrupts/diagnostics/status information
Alarms
Alarms Yes
Diagnostic alarm Yes
Diagnostic messages
Diagnostic functions Yes
Monitoring the supply voltage Yes
Wire break Yes
Short circuit Yes
Diagnostics indication LED
For status of the outputs Yes
for maintenance Yes
Degree and class of protection
IP20 Yes
Standards, approvals, certificates
CE mark Yes
C-TICK Yes
FM approval Yes
Climatic and mechanical conditions for storage and transport
Climatic conditions for storage and transport
Free fall
Drop height, max. (in packaging) 0.3 m; five times, in dispatch package
Temperature
Permissible temperature range -40 °C to +70 °C
Air pressure acc. to IEC 60068-2-13
Permissible air pressure 1080 to 660 hPa
Mechanical and climatic conditions during operation
Climatic conditions in operation
Temperature
Permissible temperature range 0 °C to 55 °C horizontal installation 0 °C to 45 °C vertical installation
Air pressure acc. to IEC 60068-2-13
Permissible air pressure 1080 to 795 hPa
Pollutant concentrations
SO2 at RH < 60% without condensation S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
Connection method
required front connector Yes
Mechanics/material
Type of housing (front)
Plastic Yes
Dimensions
Width 45 mm
Height 100 mm
Depth 75 mm
Weights
Weight, approx. 180 g