Archive for the Communication Module / communication board Category

siemens plc 1200 6ES7241-1CH30-1XB0 COMMUNICATION BOARD CB 1241, RS485

plc siemens 1200 SIMATIC S7-1200, COMMUNICATION COMMUNICATION BOARD CB 1241, RS485, SCREW CONNECTOR SUPPORTS MESSAGE BASED FREEPORT

Input current
from backplane bus 5 V DC, typ. 50 mA
Power losses
Power loss, typ. 1.5 W
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions Yes
Diagnostics indication LED
For status of the outputs Yes
Degree and class of protection
IP20 Yes
Standards, approvals, certificates
CE mark Yes
C-TICK Yes
FM approval Yes
Climatic and mechanical conditions for storage and transport
Climatic conditions for storage and transport
Free fall
Drop height, max. (in packaging) 0.3 m; five times, in dispatch package
Temperature
Permissible temperature range -40 °C to +70 °C
Air pressure acc. to IEC 60068-2-13
Permissible air pressure 1080 to 660 hPa
Mechanical and climatic conditions during operation
Climatic conditions in operation
Temperature
Permissible temperature range 0 °C to 55 °C horizontal installation 0 °C to 45 °C vertical installation
Permissible temperature change 5°C to 55°C, 3°C / minute
Air pressure acc. to IEC 60068-2-13
Permissible air pressure 1080 to 795 hPa
Pollutant concentrations
SO2 at RH < 60% without condensation S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
Mechanics/material
Type of housing (front)
Plastic Yes
Dimensions
Width 38 mm
Height 62 mm
Depth 21 mm
Weights
Weight, approx. 40 g

siemens s7-1200 plc 6GK7242-7KX30-0XE0 COMMUNICATION PROCESSOR CP 1242-7

plc siemens 1200 COMMUNICATION PROCESSOR CP 1242-7 FOR CONNECTION OF SIMATIC S7-1200 TO GSM/GPRS NET PLEASE NOTE NATIONAL APPROVALS

Transmission rate
Transfer rate / with GPRS transmission
  • with uplink / maximum
43 kbit/s
  • with downlink / maximum
86 kbit/s
Wireless technology
Type of mobile wireless service
  • is supported
  • SMS
Yes
  • GPRS
Yes
  • note
GPRS (multislot Class 10)
Type of mobile wireless network / is supported
  • GSM
Yes
  • UMTS
No
Operatng frequency
  • 850 MHz
Yes
  • 900 MHz
Yes
  • 1800 MHz
Yes
  • 1900 MHz
Yes
Transmit power
  • at operating frequency 850 MHz
2 W
  • at operating frequency 900 MHz
2 W
  • at operating frequency 1800 MHz
1 W
  • at operating frequency 1900 MHz
1 W
Interfaces
Number of electrical connections
  • for external antenna(s)
1
  • for power supply
1
Number of slots / for SIM cards 1
Design of the electrical connection
  • for external antenna(s)
SMA socket (50 ohms)
Design of slot / for SIM card Slot under front flap
Supply voltage, current consumption, power loss
Type of voltage / of supply voltage DC
Supply voltage / external 24 V
Relative positive tolerance / at 24 V / with DC 20 %
Relative negative tolerance / at 24 V / with DC 20 %
Consumed current / from external supply voltage / at 24 V / with DC
  • typical
0.1 A
  • maximum
0.22 A
Resistive loss 2.4 W
Permitted ambient conditions
Ambient temperature
  • for vertical installation / during operating phase
0…45 °C
  • for horizontal installation / during operating phase
0…55 °C
  • during storage
-40…+70 °C
  • during transport
-40…+70 °C
Relative humidity / at 25 °C / without condensation / during operating / maximum 95 %
Protection class IP IP20
Design, dimensions and weight
Width 30 mm
Height 100 mm
Depth 75 mm
Net weight 0.133 kg
Product properties, functions, components / general
Number of units / per CPU / maximum 3
Performance data
Number of possible connections / for open communication / by means of TC blocks / maximum 5
Data volume / as user data per polling / maximum 1024 byte
Performance data / S7 communication
Connection to the control center Telecontrol Server Basic
  • note
Connection to Scada system using OPC interface
  • by means of a permanent connection
supported
  • by means of a demand-oriented connection
supported
Protocol / is supported
  • DNP3
No
  • IEC 60870-5
No
Product function / data buffering if connection is aborted Yes
Product function / data buffering if connection is aborted / note up to 1000 message frames
Data volume / as user data per station / in telecontrol mode / maximum 2048 byte
Performance data / Teleservice
Diagnostic function / online diagnostics with SIMATIC STEP 7 Yes
Product function
  • program download with SIMATIC STEP 7
Yes
  • remote firmware update
No
Product functions / Security
Product function
  • password protection for teleservice access
Yes
  • encrypted data transmission
Yes
Product functions / Time
Protocol / is supported / NTP Yes

plc controller 6GK7242-5DX30-0XE0 COMMUNICATION MODULE CM 1242-5

s7 simatic COMMUNICATION MODULE CM 1242-5; FOR CONNECTION OF SIMATIC S7-1200 TO PROFIBUS AS DP SLAVE MODULE

Transmission rate
Transmission rate / at interface 1 / in accordance with PROFIBUS 9.6 kbit/s…12 Mbit/s
Interfaces
Number of electrical connections
  • at interface 1 / in accordance with PROFIBUS
1
  • for power supply
0
Design of electrical connection
  • at interface 1 / in accordance with PROFIBUS
9-pin Sub-D socket (RS485)
Supply voltage, current consumption, power loss
Type of voltage / of supply voltage DC
Supply voltage
  • 1 / from backplane bus
5 V
Consumed current
  • from backplane bus / at 5 V / for DC / Typical
0.15 A
Resistive loss 0.75 W
Permitted ambient conditions
Ambient temperature
  • for vertical installation / during operating phase
0…45 °C
  • for horizontal installation / during operating phase
0…55 °C
  • during storage
-40…+70 °C
  • during transport
-40…+70 °C
Relative humidity / at 25 °C / without condensation / during operating / maximum 95 %
Protection class IP IP20
Design, dimensions and weight
Width 30 mm
Height 100 mm
Depth 75 mm
Net weight 0.115 kg
Product properties, functions, components / general
Number of modules
  • per CPU / maximum
3
Performance data
Performance data / PROFIBUS DP
Service / as DP slave
  • DPV0
Yes
  • DPV1
Yes
Amount of data
  • of the address area of the inputs / as DP slave / overall
240 byte
  • of the address area of the outputs / as DP slave / overall
240 byte

plc module 6GK7243-5DX30-0XE0 COMMUNICATION MODULE CM 1243-5

plc controllers COMMUNICATION MODULE CM 1243-5 FOR CONNECTION OF SIMATIC S7-1200 TO PROFIBUS AS DP MASTER MODULE; PG/OP COMMUNICATION; S7-COMMUNICATION

Transmission rate
Transmission rate / at interface 1 / in accordance with PROFIBUS 9.6 kbit/s…12 Mbit/s
Interfaces
Number of electrical connections
  • at interface 1 / in accordance with PROFIBUS
1
  • for power supply
1
Design of electrical connection
  • at interface 1 / in accordance with PROFIBUS
9-pin Sub-D socket (RS485)
Supply voltage, current consumption, power loss
Type of voltage / of supply voltage DC
Supply voltage
  • external
24 V
Relative positive tolerance / at 24 V / with DC 20 %
Relative negative tolerance / at 24 V / with DC 20 %
Consumed current
  • from external supply voltage / at 24 V / with DC
  • typical
0.1 A
Resistive loss 2.4 W
Permitted ambient conditions
Ambient temperature
  • for vertical installation / during operating phase
0…45 °C
  • for horizontal installation / during operating phase
0…55 °C
  • during storage
-40…+70 °C
  • during transport
-40…+70 °C
Relative humidity / at 25 °C / without condensation / during operating / maximum 95 %
Protection class IP IP20
Design, dimensions and weight
Width 30 mm
Height 100 mm
Depth 75 mm
Net weight 0.134 kg
Product properties, functions, components / general
Number of modules
  • per CPU / maximum
1
Performance data
Performance data / PROFIBUS DP
Service / as DP master / DPV1 Yes
Number of DP slaves / on DP master / usable 16
Amount of data
  • of the address area of the inputs / as DP master / overall
512 byte
  • of the address area of the outputs / as DP master / overall
512 byte
  • of the address area of the inputs / per DP slave
244 byte
  • of the address area of the outputs / per DP slave
244 byte
  • of the address area of the diagnostic data / per DP slave
240 byte
Service / as DP slave
  • DPV0
No
  • DPV1
No
Performance data / S7 communication
Number of possible connections / for S7 communication
  • maximum
8
  • with PG connections / maximum
1
  • with PG/OP connections / maximum
3
  • note
max. 4 connections to other S7 stations
Performance data / multi-protocol mode
Number of active connections / with multi-protocol mode
  • without DP / maximum
8
  • with DP / maximum
8

 

s7 1200 plc 6ES7241-1AH30-0XB0 COMMUNICATION MODULE CM 1241, RS232

simatic plc SIMATIC S7-1200, COMMUNICATION COMMUNICATION MODULE CM 1241, RS232, 9 PIN SUB D (FEMALE), SUPPORTS MESSAGE BASED FREEPORT

Input current
Current consumption, max. 220 mA; From L5+; logic
Power losses
Power loss, typ. 1.1 W
Interfaces
Number of interfaces 1
Interface physics, RS 232C (V.24) Yes
Point-to-point
Cable length, max. 10 m
Integrated protocol driver
ASCII Yes
Climatic and mechanical conditions for storage and transport
Climatic conditions for storage and transport
Free fall
Drop height, max. (in packaging) 0.3 m; five times, in dispatch package
Temperature
Permissible temperature range -40 °C to +70 °C
Air pressure acc. to IEC 60068-2-13
Permissible air pressure 1080 to 660 hPa
Mechanical and climatic conditions during operation
Climatic conditions in operation
Temperature
Permissible temperature range 0 °C to 55 °C horizontal installation 0 °C to 45 °C vertical installation
Permissible temperature change 5°C to 55°C, 3°C / minute
Air pressure acc. to IEC 60068-2-13
Permissible air pressure 1080 to 795 hPa
Software
Runtime software
Target system
S7-1200 Yes
Dimensions
Width 30 mm
Height 100 mm
Depth 75 mm
Weights
Weight, approx. 150 g

plc easy 6ES7241-1CH31-0XB0 COMMUNICATION MODULE CM 1241, RS422/485

siemens plcs SIMATIC S7-1200, COMMUNICATION MODULE CM 1241, RS422/485, 9 PIN SUB D (MALE), SUPPORTS MESSAGE BASED FREEPORT

Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
Current consumption, max. 240 mA; From L5+; logic
Power losses
Power loss, typ. 1.2 W
Interfaces
Number of interfaces 1
Interface physics, RS 422/RS 485 (X.27) Yes
Point-to-point
Cable length, max. 1000 m
Integrated protocol driver
ASCII Yes; Available as library function
USS Yes; Available as library function
Climatic and mechanical conditions for storage and transport
Climatic conditions for storage and transport
Free fall
Drop height, max. (in packaging) 0.3 m; five times, in dispatch package
Temperature
Permissible temperature range -40 °C to +70 °C
Air pressure acc. to IEC 60068-2-13
Permissible air pressure 1080 to 660 hPa
Mechanical and climatic conditions during operation
Climatic conditions in operation
Temperature
Permissible temperature range 0 °C to 55 °C horizontal installation 0 °C to 45 °C vertical installation
Permissible temperature change 5°C to 55°C, 3°C / minute
Air pressure acc. to IEC 60068-2-13
Permissible air pressure 1080 to 795 hPa
Software
Runtime software
Target system
S7-1200 Yes
Dimensions
Width 30 mm
Height 100 mm
Depth 75 mm
Weights
Weight, approx. 155 g